Auto Wires
Wire production and repair
Mr. Mikron is the largest manufacturer of wire in Bulgaria – in single and serial units for cars, trucks, jeeps, motorcycles, boats, agricultural and industrial machinery.
Mr. Mikron’s team fully manufactures to the customer’s sample/drawing the wire required in the particular case as well as recycles existing wires depending on the condition, for which the customer is required to bring/courier all available parts of the damaged wire so that it can be manufactured/recycled correctly.
Call us now: +359 878 47 30 31
Mr. Mikron’s Wire Fabrication and Repair!
Mr. Mikron is the largest manufacturer of wires in Bulgaria – in single and serial numbers for cars, trucks, jeeps, motorcycles, boats, agricultural and industrial machinery.
Industrial wires:
Industrial cords are products whose structure is determined by their functions, and they are generally divided into three types:
– Soft cord that pulls – it is used for cord for the ass, clutch, handbrake, opening the front cover, opening the trunk, opening the door, opening the tank, etc.;
– A hard cord (or wire) that pulls and pushes – used for speed cords, fuel control in the car, turning on and off hydraulic pumps, unlocking the boom of an excavator, controlling joysticks for agricultural and industrial equipment, etc. ;
– Flexible cord (tachometric shaft) – used for the cord of odometers, seats, tachographs, epilators for birds, trimmers, vibrators for concrete, etc.
According to the types, the cords are composed of a steel rope (braid of ropes) or wire, which moves in the so-called armor (made of a braid of wire and covered in a rubber hose or plastic), which protects it from atmospheric and other influences. The edges of the armor end with tips that are clamped on a press for the edges of the armor. The rope/cord, in turn, also ends with tips on both ends, which vary in shape and type, depending on the functions that the cord performs.
Services offered by the service:
1. Production of all types of wire in single and serial numbers;
2. Recycling of all types of cord – replacement of broken/worn cords, correction of lengths, ends, etc. (valid if the armor is healthy);
3. Disassembly and assembly of all types of wires – for gears, clutches, throttle, opening of front/rear covers, seats, window regulators (see window regulators section) and others.
Mikron Docev does not sell ready-made wires!
Mr. Mikron’s team makes the wire that is needed in the specific case entirely according to the customer’s sample/drawing, as well as recycles existing wires, depending on the condition, and for these purposes it is necessary for the customer to bring/send by courier all available parts of the damaged cord, so that it can be manufactured/recycled correctly.
Mikron Docev is the largest producer in Bulgaria of wire for all needs – from cars, trucks, jeeps, to all kinds of motorcycles, boats, agricultural and industrial equipment.
We make completely according to the customer’s sample/drawing the cord that is needed in the specific case, as well as we recycle existing cords, depending on the condition, and for these purposes it is necessary for the client to bring/send by courier all available parts of the injured cord, for so that it can be manufactured/recycled correctly. There is no limit to the possibilities of making a new or recycling an existing cable, regardless of its dimensions and functions, as well as the machine in which it is installed – we restore and manufacture completely new cables for: buses, trucks, buses, combine harvesters, excavators, bulldozers , forklifts, bobcat, rammer, concrete trucks, rollers, road construction equipment, front loaders, tractors, cranes, mowers, trimmers, tillers, trailers, vibrators for concrete, all kinds of boats, lifts, fitness devices, cranes, mining equipment.
Make an appointment for a wire overhaul!
What the clients say about us
Thousands of satisfied customers have trusted Mr. Mikron since 1989.
Thousands of satisfied customers have trusted Mr. I am extremely happy with their work, I would visit them again if needed! One of the locks on my vehicle had failed and would not lock/unlock the door.
The review is posted on Google Local Reviews.Mikron since 1989.
What type of wire replacement are available?
The clutch cable is the connection between the clutch pedal and the gearbox. it allows the driver to change gears or disengage.
A damaged or broken connector wire leads to:
-incorrect operation of the pedal;
– impossibility to change gears after breaking it;
the change of the stinger is required at the appearance of the first symptoms, namely:
– difficulty in pressing the pedal;
-unpleasant noises when using the clutch;
changing the wire requires disconnecting it from the side of the gearbox and from the side of the pedal, and in some cars it is necessary to disassemble a part of the instrument panel, in order to reach the place where the wire passes from the engine compartment to the compartment. In some cases, additional adjustment of the cord is required after installation.
changing the wire by non-professionals can lead to additional problems for the affected car systems!
The handbrake cable (parking brake) is the connection between the handbrake handle (in some cases a pedal) and the brake devices on the rear wheels. it allows the driver of the car to block the movement of the rear wheels after parking or to stop when the primary brakes fail.
A damaged or broken handbrake cable can affect the correct operation of the brake system or lead to a breakaway incident when the car is parked on an incline.
In case of a damaged bumper on the handbrake cord, in addition to its faster wear, there is also a danger that water will enter the bumper and it will fail when it freezes. these facts make it imperative to replace the cable at the first appearance of a problem with the handbrake.
Changing the cable requires disconnecting it from the side of the operating handle in the compartment and from the rear brake devices. here is the place to mention that in some models of modern cars, the handbrake has been replaced by an electric one, which works either with a wire (Mr. Mikron also repairs this type of handbrake) or by means of electric motor/s.
Changing the wire by non-professionals can lead to additional problems for the affected car systems!
The gears of the gears (in cars with manual gears there are two, in automatic ones – one) represent the connection between the speed lever of the car and the transmission itself (gearbox), by means of which the driver changes the different gears (speeds).
Injured tendons of the speedsters most often have the following symptoms:
– Difficult gear shifting from the lever;
-Loss of some of the gears (impossibility to engage);
these symptoms show that the problem is in the wear of the cord and there is a risk of breakage. This is the moment to take emergency measures to avoid the possibility of the car not moving. the consequences of a suitable accident are very unpleasant, and therefore, in the presence of changes when switching gears, it is imperative to contact a specialist. if the wire is not broken, it can be recycled, but if it is broken or has other mechanical damage, it will be necessary to make a new one, which will be superior in quality to the sold ready-made wires that are not produced by the car manufacturer itself. here is the place to mention that some models of modern cars do not use a wire to control the gears of the transmission.
The replacement of the speed cables requires disconnecting them from the side of the speed lever in the compartment and from the side of the transmission, and in some cars it is also necessary to disassemble a part of the dashboard. adjustment is required after replacement.
Changing the wire by non-professionals can lead to additional problems for the affected car systems!
The odometer and tachometer wires represent the connection between the odometer (tachometer) on the dashboard of the car and the transmission (gearbox) itself, through which we receive data on the speed of the car and the operating revolutions of the engine.
Damaged wires of the odometer or tachometer lead to incorrect operation of the instruments on the instrument panel and the inability to determine the speed of the car, which could lead to incidents.
Replacing the wire requires its disconnection from the side of the transmission and from the side of the dashboard, and in some cars it is necessary to disassemble a part of the dashboard, in order to ensure access to the place where the wire passes from the engine compartment to the passenger compartment. modern cars do not use a wire to access data on engine speed and revolutions, since these data are collected by electronic sensors.
Changing the wire by non-professionals can lead to additional problems for the affected car systems!
The accelerator pedal is the connection between the accelerator pedal in the passenger compartment and the throttle valve of the engine, through which the driver can accelerate or decrease the speed of the car.
An injured hamstring may have the following symptoms:
– After applying the gas and releasing the pedal, the throttle does not return the gas and the car leaves with a forced driver;
-Difficult control when feeding a certain amount of gas due to a broken or loose cord;
– Final failure of the gas pedal to control the engine.
this requires timely intervention by an authorized mechanic, as a problem with the wire would lead to the inability of the car to move.
Changing the wire requires disconnecting it from the side of the throttle valve and from the side of the gas pedal in the compartment. some of the modern cars do not use a wire to control the throttle of the engine, since this function is performed by electronic sensors.
Changing the wire by non-professionals can lead to additional problems for the affected car systems!
The hood opening link is the connection between the opening handle in the compartment and the locking mechanism of the car’s front hood.
In case of a problem with the sting, the following symptoms appear:
-Difficult movement of the handle to open the lid;
– Impossibility of the sting to return the handle after opening;
– Impossibility to open the lid even when the handle is pulled all the way.
changing the wire is mandatory at the first symptoms, because opening the front cover, after the wire is broken or blocked, is difficult and can lead to other injuries to the locking mechanism or to the car’s paint (grille) . it is good that the service is performed by an authorized specialist.
Changing the cord requires its detachment from the side of the handle in the compartment and from the side of the locking mechanism on the front cover of the car, and in some cars it is necessary to disassemble a part of the dashboard, in order to ensure access to the place where the cord passes from the engine section in the compartment.
Changing the wire by non-professionals can lead to additional problems for the affected systems of the car
Car window lifter wire: more information in the “Window lifters overhaul at Mr. Mikron” category.
The opening cord from the outside or inside of a car door is the connection between the door opening handle and the corresponding lock.
In case of a problem with the sting, the following symptoms appear:
-Difficult movement of the handle to open the door;
-The handle does not return to its original position after opening;
– Impossibility to open the door even when the handle is pulled all the way;
– Freely moving handle that does not open at all (broken or detached cord).
the replacement of the stinger is imperative when the first symptoms appear, because sooner or later the door will stop opening.
Replacing the cord requires dismantling the interior skin of the door, dismantling its insulating membrane, detaching the cord from the handle side, disassembling the lock and detaching it from its side. in the case of different makes and models of cars, the cord can be replaced by a rigid wire, a lever system, etc.
Changing the wire by non-professionals can lead to additional problems for the affected car systems!
The stinger of a choke is actually a wire (hard stinger) that pushes and pulls. through it, the driver of the car has the possibility of fine adjustment of the throttle by means of a handle in the compartment of the car, which is connected to the throttle valve of the engine by means of a cable.
Symptoms of a choke management problem are as follows:
-Difficult movement of the handle;
– when pulling (returning) the vacuum cleaner to the initial position, there is no change in the operation of the engine (broken connection between the handle and the throttle).
changing the wire requires disconnecting it from the side of the handle in the compartment and from the side of the engine throttle valve, and in some cars it is necessary to disassemble part of the dashboard, to ensure access to the place where the wire passes from the engine compartment to the compartment .
Changing the wire by non-professionals can lead to additional problems for the affected car systems!
Жилата на парното всъщност представляват тел (твърдо жило), която бута и дърпа. посредством тази нейна функция на водача или пасажерите в автомобила се дава възможност да регулират различните функции на парното (климатика) в автомобила, като телта е закачена в единия край, най-често за лост или бутон, а в другия – за съответната клапа на парното.
При проблем с управлението на функциите на парното (климатика) се наблюдават следните симптоми:
-Трудно движение на лостчето за съответната клапа;
-Липса на реакция след промяна на настройките на клапите (например от топло към студено);
-Свободно движение на задвижващото лостче, без да може да изпълнява функциите си: скъсано или откачено жило, счупено ухо за закачане на жилото за клапата (лостчето).
смяната на жилото изисква частично или в повечето случаи пълно разглобяване на арматурното табло, което е доста трудоемка и изискваща внимание и прецизност работа, което от своя страна налага бъде извършена от оторизиран специалист.
Смяната на жило от непрофесионалисти може да доведе до допълнителни проблеми по засегнатите системи на автомобила!
The seat cord is a soft or flexible cord (tachometric shaft), depending on the model of the car, through which different settings of the seat positions can be made. the cord makes the connection between the corresponding handle or electric motor and the regulating mechanism in the seat.
Symptoms of a problem with the adjustable functions of the seat are that it is difficult or impossible to move them.
The replacement of the seat cord is recommended to be carried out by a specialist, since, in order to access it, it is almost always necessary to dismantle the seat itself, then remove the upholstery partially or completely, depending on the model.
Changing the wire by non-professionals can lead to additional problems for the affected car systems!
Micron Docsev is the largest producer in Bulgaria of wire for all needs – from cars, trucks, jeeps to all kinds of motorcycles, boats, agricultural and industrial equipment.
Changing the wire by non-professionals can lead to additional problems for the affected car systems!
Mikron Docev OOD, Sofia, Kniazhevo quarter, Tsar Boris III Blvd. 298,
p.c. 1619 /after the wheel of Tram #5, the second straight on the right/
Work time:
Reception: Monday – Friday: 07:30 h. – 17:00 h.
Cashier: Monday – Friday: 07:30 h. – 17:00 h.
Saturday and Sunday: Days off
Telephones:
+359 898 47 30 31 – Information about window lifters
+359 878 47 30 31 – Information about the line
+359 889 300 400 – Information about sunroof systems
Email: [email protected]